The Allen - Dark Roast Dublin (602 Last)
Boot and Leather
Dublin is a vegetable tanned, rugged side leather from the world famous Horween tannery in Chicago. Named after its coffee-colored tannage, this vegetable tanned leather will develop a very rich, deep patina after a few weeks or months of wear. Waxed and tanned with a high vegetable oil tan content, this leather will stand up to the elements you put it through. Due to this being a more rugged side leather, natural imperfections may be present and will vary. Some of these can be seen in the photos listed. Please see the Leather + Care page for more details.
Last - 602
The new last is aimed towards balance, flexibility and comfort. The 602 provides the below features:
1. Tapered heel and arch.
2. E width at the forefoot and into a rounder toebox which also helps with pronation.
3. Contoured to provide a comfortably snug fit.
The new build focuses on enhanced breath-ability and shock absorption in a more natural way. The below are features/changes made for this model as well as others coming out:
1. Thicker, unlined upper leathers - 6 oz. and 2/3 gusset tongue.
2. Vegetable tanned bends leather insoles - considered to be the gold standard of insoles due to their moisture wicking properties, ease of use and longevity.
3. Thicker bends leather, outsole-grade midsoles for enhanced natural shock absorption.
Click here to find out how this leather should be treated.
Have a question before, during or after your purchase? Reach out to us at email@example.com and we would be happy to assist you.
Construction – Goodyear welted with natural cork and shank
Upper – Dark Roast Dublin leather - vegetable tanned from Horween
Insole – Vegetable tanned bends leather
Hardware – 8 large English Brass eyelets
Laces – Round waxed cotton
Welt – Vegetable tanned leather
Midsole – Vegetable tanned leather
Sole/Heel – Dainite Rubber
No. 18 Last (Original)
This last runs between a D and single E width with a slight almond shaped toe. Our general rule of thumb is to go down a half size from your typical sneaker size. So for example, if you wear a size 10.5 in sneakers, we would suggest a size 10 in our boots. We recommend trying your boots on/wearing them with a thin sock or dress sock to get an accurate idea of feel. If you wear a single E wide width or prefer a bit of extra room in your footwear, we would suggest ordering your Brannock size in this last. Our last will generally not accommodate EE or EEE widths and higher as measured on a Brannock device. However do note that just because these widths are labeled on a size from a brand as EE or EEE, it does not mean that the actual Brannock measurement is a EE or EEE as sometimes wide is abbreviated as EE or EEE.
Brand size comparison examples:
Brannock - Half size down to true to size. If you have a wider forefoot but not quite a single E width, go with your Brannock size. If you are a standard/D width, go a half size down from Brannock.
Viberg 2030 - Half size up if D/standard width.
Red Wing No. 8 Last - Half size up.
Allen Edmond's Boots - True to size.
Alden Barrie - Generally one half size up.
Nike - Half size down.
New Balance - Half size down.
Adidas - Half size down.
Reebok - Half size down.
More sizing information on this last can be found via this video link.
No. 602 Last (New)
This is the newer Parkhurst last. Its features include a rounder, more voluminous toebox along with a tapered arch and heel. Opening up into a single E width in the forefoot and toebox, there will be a decent amount of breathing room and additional flexibility to wear the socks of your preference. A higher instep angle will also help to accommodate those looking for additional vertical room.
Brand size comparison examples:
Brannock - Half size down. If you're a 10D Brannock or between a D and E width, go with size 9.5 in the 602 last. If you measure a single E width, we suggest going with your Brannock size.
Parkhurst No. 18 - True to size.
Alden Barrie - True to size.
Red Wing No. 8 - True to size.
Wolverine - True to size.
Sizing can be particular for each individual and we are more than happy to help you determine the correct size in our boots by emailing firstname.lastname@example.org. We can also assist in identifying the right size for you based off of what you wear in other brands of footwear.
We believe in making our footwear in the U.S. to help revive the American manufacturing industry. The materials used to make this boot came from the below states:
Wisconsin, Ohio, Illinois, New York, Michigan, Pennsylvania and Massachusetts.
We love using Dainite soles and C.F. Stead leather - and will continue to do so in the future. Since these are not manufactured directly here they are ordered through American distributors in the Mid-West and Eastern coast to help support the supply chain both in the industry and the U.S.A.