Nick's x Parkhurst Falcon V1

Pre-Order Here

*Update: Order window extended through 5/31.


Meet the Nick's x Parkhurst Falcon V1 boot. Built by Nick's Boots with their legendary construction and on the Parkhurst 602 last. This boot is meant to combine the style of build Nick's is known for while offering the fit and aesthetic our 602 last is known for.

Featured Leather Offerings

Multiple leathers are available, head on over to Nick's website via the above link to see all.

Sizing Guidance

  • True to your current 602 last sizing if it is fitting you comfortably
  • Brannock D width - half size down
  • Brannock single E width - go with Brannock size in typical length
  • Brannock between D and E - go with Brannock size regular width, or half size down and wide (EE)
  • Brannock double E width - go a half size down but choose wide width
  • Sizes offered in 7-13 in both regular and wide widths for the 602 last

A few quick notes

*Stitchdown, hand-sewn and hand-lasted construction tends to fit a bit more snug in the heel, arch and instep.

*Taking your normal 602 last size in this collaboration boot would be recommended. If the current 602 last size you're wearing is a bit snug or tight after wearing for some time, we suggest going up a half size into the collab. boot. If the current 602 last model you have from Parkhurst fits you large and you have excess volume, we suggest sizing down a half size - or if you want to have extra room either way, take the same size in this collab. boot.

*If you are between sizes on the 602 last, we suggest going with the larger size into this collab. boot. For example, if you're between a size 8.5 and 9 in the 602 last, or have a slightly wider foot in this instance, we suggest going for the size 9 in this collab. boot.

Our lasts run big for most customers. Therefore, we suggest in general sizing down from your typical sneaker or shoe size. Naturally we understand there are those who may fall between the cracks of general sizing guidance as every foot type is different. If you need help with sizing, feel free to reach out to with any footwear sizing information you currently have, and we can help identify the best size for you in Parkhurst boots. 

602 Last 

This last has a slightly lower volume to provide a more comfortably snug fit and to help prevent heel slip while maintaining a rounder forefoot. Its features include a single E width toebox as measured on the Brannock, along with a tapered arch and snug heel. The instep on this last is more contoured to the natural shape of your instep angle. The taper in the arch and heel can help provide a more natural, mild arch support.

Size comparison examples from current customers going off of a D/standard width:

Brannock - Half size down. If you're a 10D Brannock or slightly over a D width, go with size 9.5 in the 602 last. If you measure a single E width, more towards a single E width or prefer a slight bit of extra room without a drastic length increase, we suggest going with your Brannock size. In this example, a size 10. If you are a narrow width or low volume foot, we suggest going a full size down from your Brannock measurement.

Alden Barrie and Trubalance - True to size if D width. 

Red Wing No. 8 - True to size if D width. 

Thursday Boot - True to size if D width.

Allen Edmond's - True to size if D width, half size down if narrow.

Nike - Full size down if standard/medium width, half size down if width is slightly wider.

Adidas - Full size down if standard/medium width, half size down if width is slightly wider.

New Balance - Full size down if standard/medium width, half size down if width is slightly wider.

602M Last

This last is used for Chelsea and moc toe boots in order to support the traditionally narrower patterns for them. The difference between the two is the 602M last has a touch more depth in the toebox and width in the pinky toe area by about 1mm. Therefore, you may find there to be a slight addition of room in the toebox in this last.

Sizing for this and the 602 last has been consistent between D and up to single E width as measured on Brannock. So if you take a size 9 in the 602 last and are a D/E width, we would suggest a size 9 in the 602M last. If you take a size 9 in the 602 last and are a true D or D/C width, we suggest going down a half size into the 602M last, so in this case, a size 8.5 would be recommended. General size translations are below:

Brannock - Half size down, full size if narrower, lower volume foot.

Wide Width's - Take your normal wide width numerical size for E and EE. EEE will not fit.

Alden Trubalance - True to size

Alden Barrie - True to size

Red Wing - True to size

Nike - Full size down

New Balance - Full size down

Adidas - Full size down

Wide Width - 602 Last

We suggest taking your normal wide width size in welted footwear. If you are going off of your Brannock size, we suggest going down a half size. For example, if you measure a 10EE on the Bannock, we suggest ordering a size 9.5EE in our boots. Single E widths are typically accommodated by our regular 602 last since the toebox at its peak is a single E as measured on the Brannock.

Women’s 602

We have found that taking your typical women’s size in boots to be a quite true to size for our 602 last. For some, this may translate into a half size down from your typical sneaker size. For others with narrow or low volume feet, this may translate into a full size down from sneaker size. Some brand sizing translation examples can be found below:

Adidas – Half size down

Nike – Half size down

Converse – True to size, half size up if wide or high-volume foot

Red Wing – True to size

Frye – True to size

Tory Burch – True to size

Timberland – True to size

We believe in making our footwear with manufacturers who create the best quality boots and components we can find, while keeping in mind production sustainability and environmental impact. At this moment, almost half or of our production is done from solar panel-generated electricity used to run the machines to make our boots. Our supply chains in both the US and Spain have allowed us to use better quality components such as steel shanks and different vegetable tanned leathers while incorporating products made in the US as well. We are grateful to work with some of the best factories and component manufacturers in the industry to help make our boots up to quality specifications desired by our customers. Working with both suppliers and manufacturers in the USA, and now Spain, has helped us to produce the best boot we have made since Parkhurst was started at the end of 2018.

You may also like

Recently viewed