The Bidwell Derby - Brown Havana
Shoe and Leather
Meet the newest style to enter the Parkhurst lineup - the Bidwell derby. A staple piece of footwear for anyone's collection, this shoe is built with one of the most versatile types of leather you can get - brown Havana leather from Horween. Over time and with conditioning this leather will darken. The vegetable tanned leather insole, cork, shank and heel pads will help to provide all day comfort and conformity.
New Last - The 602
The new last is aimed towards balance, flexibility and comfort. The 602 provides the below features:
1. Tapered heel and arch.
2. E width at the forefoot and into a rounder toebox which also helps with pronation.
3. Slightly higher instep yet enough volume to provide a comfortably snug fit.
Sizing and Fit
If for example you measure a 10D or are between a D and E width on the Brannock, we suggest sizing down to a 9.5 in this last. If you are an E or slightly above a single E width or would like extra room, a size 10 in this example would be recommended. If you are between D and E widths and want to make sure you have some extra space, we suggest going with your Brannock size.
If you sized down a half size from Brannock into the No. 18 last, we suggest taking your same size in the 602 last. If your No. 18 last is a size 10 then we suggest a size 10 in the 602 last.
The new build focuses on enhanced breath-ability and shock absorption in a more natural way. Check out this build here.
Click here to find out how this leather should be treated.
Have a question before, during or after your purchase? Reach out to us at firstname.lastname@example.org and we would be happy to assist you.
Construction – Goodyear welted with natural cork and shank
Upper – 5.5 ounce Havana leather from Horween
Inlay/Insole – Vegetable tanned bends leather insole with heel to arch insert
Hardware – 5 blind eyelets
Laces – Braided round waxed cotton
Welt – Vegetable tanned leather
Midsole – Vegetable tanned leather
Sole/Heel - Dainite
No. 18 Last (Original)
This last runs between a D and single E width with a slight almond shaped toe. Our general rule of thumb is to go down a half size from your typical sneaker size. So for example, if you wear a size 10.5 in sneakers, we would suggest a size 10 in our boots. We recommend trying your boots on/wearing them with a thin sock or dress sock to get an accurate idea of feel. If you wear a single E wide width or prefer a bit of extra room in your footwear, we would suggest ordering your Brannock size in this last. Our last will generally not accommodate EE or EEE widths and higher as measured on a Brannock device. However do note that just because these widths are labeled on a size from a brand as EE or EEE, it does not mean that the actual Brannock measurement is a EE or EEE as sometimes wide is abbreviated as EE or EEE.
Brand size comparison examples:
Brannock - Half size down to true to size. If you have a wider forefoot but not quite a single E width, go with your Brannock size. If you are a standard/D width, go a half size down from Brannock.
Viberg 2030 - Half size up if D/standard width.
Red Wing No. 8 Last - Half size up.
Allen Edmond's Boots - True to size.
Alden Barrie - Generally one half size up.
Nike - Half size down.
New Balance - Half size down.
Adidas - Half size down.
Reebok - Half size down.
More sizing information on this last can be found via this video link.
No. 602 Last (New)
This is the newer Parkhurst last. Its features include a rounder, more voluminous toebox along with a tapered arch and heel. Opening up into a single E width in the forefoot and toebox, there will be a decent amount of breathing room and additional flexibility to wear the socks of your preference. A higher instep angle will also help to accommodate those looking for additional vertical room.
Brand size comparison examples:
Brannock - Half size down. If you're a 10D Brannock or between a D and E width, go with size 9.5 in the 602 last. If you measure a single E width, we suggest going with your Brannock size.
Parkhurst No. 18 - True to size.
Alden Barrie - True to size.
Red Wing No. 8 - True to size.
Wolverine - True to size.
Sizing can be particular for each individual and we are more than happy to help you determine the correct size in our boots by emailing email@example.com. We can also assist in identifying the right size for you based off of what you wear in other brands of footwear.
We believe in making our footwear in the U.S. to help revive the American manufacturing industry. The materials used to make this boot came from the below states:
Wisconsin, Ohio, Illinois, New York, Michigan, Pennsylvania and Massachusetts.
We love using Dainite soles and C.F. Stead leather - and will continue to do so in the future. Since these are not manufactured directly here they are ordered through American distributors in the Mid-West and Eastern coast to help support the supply chain both in the industry and the U.S.A.